ACQPA
Corrosion protection for C3-H and C4-H
ISO 12944
Corrosion protection for C3-H
ISO 12944
Corrosion protection for C4-H
ISO 12944
Corrosion protection for C5-H
EN 13501-1
Fire reaction: B-s1, d0 class
Product reserved to professional users, according to the REACH Regulation.
Technical Documentation
Technical DataSheet 7K230 EN
Material Safety DataSheet 7K231 EN
Material Safety DataSheet 7K231 3N11 EN
Material Safety DataSheet 7K231 5N15 EN
Material Safety DataSheet 7K231 7024 EN
Material Safety DataSheet 7K231 7N12 EN
Material Safety DataSheet 7K231 7N16 EN
Material Safety DataSheet 7K231 7N40 EN
Material Safety DataSheet 7K231 7N47 EN
Material Safety DataSheet 7K231 7X04 EN
Material Safety DataSheet 7K231 9001 EN
Material Safety DataSheet 7L198 9999 EN
Material Safety DataSheet 7L190 9999 EN
Material Safety DataSheet 7K231 9N05 EN
Material Safety DataSheet 7K231 9N10 EN
Technical DataSheet 7K238 EN
Material Safety DataSheet 7K231 EN
Material Safety DataSheet 7K231 3N11 EN
Material Safety DataSheet 7K231 5N15 EN
Material Safety DataSheet 7K231 7024 EN
Material Safety DataSheet 7K231 7N12 EN
Material Safety DataSheet 7K231 7N16 EN
Material Safety DataSheet 7K231 7N40 EN
Material Safety DataSheet 7K231 7N47 EN
Material Safety DataSheet 7K231 7X04 EN
Material Safety DataSheet 7K231 9001 EN
Material Safety DataSheet 7L198 9999 EN
Material Safety DataSheet 7K231 9N05 EN
Material Safety DataSheet 7K231 9N10 EN
Interested in this product?

We are at your disposal, do not hesitate in contacting us.

Contacts

Preparation and Application

Steel: blast clean the steel to Sa 2½ grade, according to ISO 8501-1. The roughness profile should be adjusted, depending on the thickness of the product to be applied. Remove powder residues and abrasive residues from surface. These indications are generic, applicable to several products and merely informative.

Aluminium: remove oil, grease or soap film with neutral detergent or emulsion cleaner. Blast lightly with fine abrasive.

Galvanized Surfaces: remove any oil soap film using a neutral detergent. Treat the surface in accordance with a lightly blast with fine abrasive. If galvanizing has been exposed to exterior weathering for 6 months or more, remove zinc corrosion products by mechanical means, like power sander. Remove oil grease with the cleaner.

For more information see the Technical DataSheet or contact us.