Qualicoat License
Approved product for Class 2
Qualisteelcoat License
Approved product
Product reserved to professional users, according to the REACH Regulation.
Technical Documentation
Technical DataSheet
72W00 EN
Material Safety DataSheet
72W00 3000 EN
Material Safety DataSheet
72W00 3020 EN
Material Safety DataSheet
72W00 5005 EN
Material Safety DataSheet
72W00 5017 EN
Material Safety DataSheet
72W00 8012 EN
Material Safety DataSheet
72W00 8019 EN
Material Safety DataSheet
72W00 8028 EN
Material Safety DataSheet
72W00 9010 EN
Material Safety DataSheet
72W00 9016 EN
Declaration of Performance
72W00 EN
Declaration of Performance
72W00 EN
Declaration of Performance
72W00 EN
Declaration of Performance
72W00 EN
Declaration of Performance
72W00 EN
Declaration of Performance
72W00 EN
Declaration of Performance
72W00 EN
Preparation and Application
Aluminium: remove oil, grease or soap film with neutral detergent or emulsion cleaner. Blast lightly with fine abrasive.
The surface must be dry, clean and free of dust, grease and other contaminants. Do not apply in humid conditions and/or extreme temperatures. These indications are generic, applicable to several products and purely informative.
Steel: blast clean the steel to Sa 2½ grade, according to ISO 8501-1. The roughness profile should be adjusted, depending on the thickness of the product to be applied. Remove powder residues and abrasive residues from surface. These indications are generic, applicable to several products and merely informative.
For more information see the Technical DataSheet or contact us.