Qualicoat License
Approved product for Class 2
Qualisteelcoat License
Approved product
Product reserved to professional users, according to the REACH Regulation.
Technical Documentation
Technical DataSheet
72W03 EN
Material Safety DataSheet
72W03 20M8 EN
Material Safety DataSheet
72W03 3013 EN
Material Safety DataSheet
72W03 5005 EN
Material Safety DataSheet
72W03 5017 EN
Material Safety DataSheet
72W03 7016 EN
Material Safety DataSheet
72W03 7021 EN
Material Safety DataSheet
72W03 8019 EN
Material Safety DataSheet
72W03 8028 EN
Material Safety DataSheet
72W03 8146 EN
Material Safety DataSheet
72W03 9005 EN
Material Safety DataSheet
72W03 9010 EN
Material Safety DataSheet
72W03 9016 EN
Material Safety DataSheet
72W03 Z049 EN
Declaration of Performance
72W03 EN
Declaration of Performance
72W03 EN
Declaration of Performance
72W03 EN
Declaration of Performance
72W03 EN
Declaration of Performance
72W03 EN
Declaration of Performance
72W03 EN
Declaration of Performance
72W03 EN
Preparation and Application
Aluminium: remove oil, grease or soap film with neutral detergent or emulsion cleaner. Blast lightly with fine abrasive.
The surface must be dry, clean and free of dust, grease and other contaminants. Do not apply in humid conditions and/or extreme temperatures. These indications are generic, applicable to several products and purely informative.
Steel: blast clean the steel to Sa 2½ grade, according to ISO 8501-1. The roughness profile should be adjusted, depending on the thickness of the product to be applied. Remove powder residues and abrasive residues from surface. These indications are generic, applicable to several products and merely informative.
For more information see the Technical DataSheet or contact us.