EN 1504-2
Product with CE Marking
EN 13813
Product with CE Marking
EN 12873: Influence of Materials on Drinking Water
This product complies with the norm specifications
Product reserved to professional users, according to the REACH Regulation.
Technical Documentation
Material Safety DataSheet 7P951 1N15 EN
Technical DataSheet 7P950 EN
Material Safety DataSheet 7P951 1N15 EN
Material Safety DataSheet 7P952 9999 EN
Declaration of Performance 7P950 EN
Interested in this product?

We are at your disposal, do not hesitate in contacting us.


Preparation and Application

Concrete: the concrete should be allowed to have a minimum 28 days to harden, a minimal tensile strength of 1.5 N/mm² and a minimum compression resistance of 25 N/mm². The surface must be clean, dry, free from laitance, old paints and other contaminants.

Steel: blast clean the steel to Sa 2½ grade, according to ISO 8501-1. The roughness profile should be adjusted, depending on the thickness of the product to be applied. Remove powder residues and abrasive residues from surface. These indications are generic, applicable to several products and merely informative.

For more information see the Technical DataSheet or contact us.