Type I Product - immersion in class I fluids
Type I Product - immersion in class II fluid
INTA 164402 A
Protective coating resistant to water and liquid fuels
Product reserved to professional users, according to the REACH Regulation.
Technical DataSheet 7M740 EN
Material Safety DataSheet 7M741 0501 EN
Material Safety DataSheet 7M741 7038 EN
Material Safety DataSheet 7M742 9999 EN
Material Safety DataSheet 7M741 V272 EN
Material Safety DataSheet 7M741 V273 EN
Steel: blast clean the steel to Sa 2½ grade, according to ISO 8501-1. The roughness profile should be adjusted, depending on the thickness of the product to be applied. Remove powder residues and abrasive residues from surface. These indications are generic, applicable to several products and merely informative.
Concrete: the concrete should be allowed to have a minimum 28 days to harden, a minimal tensile strength of 1.5 N/mm² and a minimum compression resistance of 25 N/mm². The surface must be clean, dry, free from laitance, old paints and other contaminants.
For more information see the Technical DataSheet or contact us.