EN 1504-2
Product with CE Marking
Product reserved to professional users, according to the REACH Regulation.
Technical Documentation
Material Safety DataSheet 7N151 EN
Material Safety DataSheet 7N151 7802 EN
Material Safety DataSheet 7N151 7806 EN
Material Safety DataSheet 7N151 9010 EN
Technical DataSheet 7N150 EN
Material Safety DataSheet 7N151 EN
Material Safety DataSheet 7N151 7802 EN
Material Safety DataSheet 7N150 7802 EN
Material Safety DataSheet 7N151 7806 EN
Material Safety DataSheet 7N151 9010 EN
Material Safety DataSheet 7N190 9999 EN
Declaration of Performance 7N150 EN
Interested in this product?

We are at your disposal, do not hesitate in contacting us.

Contacts

Preparation and Application

Steel: blast clean the steel to Sa 2½ grade, according to ISO 8501-1. The roughness profile should be adjusted, depending on the thickness of the product to be applied. Remove powder residues and abrasive residues from surface. These indications are generic, applicable to several products and merely informative.

Concrete: the concrete should be allowed to have a minimum 28 days to harden, a minimal tensile strength of 1.5 N/mm² and a minimum compression resistance of 25 N/mm². The surface must be clean, dry, free from laitance, old paints and other contaminants.

For more information see the Technical DataSheet or contact us.